JinLun machine factory produces veneer peeling and debarker.

Contact Telephone

400-839-8077

News

Home > Debarker News

Frequent problems with components in the use of hydraulic debarker

TAG:debarker  hydraulic debarker  2020-11-25150People viewed
 Some parts of the hydraulic debarker are very prone to problems.Let’s introduce which parts are prone to problems and what we should do when problems occur.
Frequent problems with components in the use of hydraulic debarker
 The use of hydraulic debarker is very common nowadays,as long as they are in sheet metal processing,they will see the existence of hydraulic debarker.The debarker is composed of many accessories.If there is no regular maintenance in the operation,problems will occur.
hydraulic debarker
 The wear parts of the hydraulic debarker include the feed screw of the tool holder,the nut,the chuck shaft and the bushing,the main slide and the slider,the ruler holder and the tool holder,etc.The wear of these parts will reduce the accuracy of the equipment and affect the quality of the board.For example,the thickness of the board is uneven,uneven,wavy,and the board is rough and damaged.Therefore,we must carry out timely inspections for parts that often have problems,so as to reduce problems during use.

Other News