In the plywood production process,the failure of the veneer peeler is the most affecting production.However,the occurrence of faults cannot be avoided,so the best way to deal with it is to find the cause and deal with it in time.During the use of the veneer peeler,many users will report that the knife will retract when the veneer peeler automatically feeds;what is the reason?Let’s analyze it in detail.
　(1)Virtual connection of the feed circuit;

　(2)The electromagnetic clutch is slipping and the knife is too high.

　(3)Check whether the feed line is imaginary connected;

　(4)Clean the clutch plate with gasoline or diesel and adjust the knife height.
　If unfortunately,none of the above four methods can solve the problem of your veneer peeling machine withdrawing knife,we recommend that you still ask a dedicated technician to come and repair it.It is not terrible that the veneer peeler fails,as long as the cause can be found and the correct method is used to solve it,it is the best!