Instructions for Veneer Peeling Machine-Controls and regulations of machine

　Identification of roller rotary direction

　Roller rotary direction must be followed as:

　When initially connecting the power or when power changed,click the button to confirm the roller rotary direction as shown in Picture.If turning direction is opposite to the Picture as shown,may change any two cables in the main power inlet.

　Safety devices

　Both left and right side of machine were equipped with protection shield to prevent operator hands or other body parts being hurt by moving transmission system.May start the forward&backward motor when separating clutch,otherwise,it may result in racking or damage the machine.The limited switch restricts the maximal and minimal position of blade seat moving along guiding axis,this may protect machine from damages.

　Never move or takeoff safety devices.

　The machine is designed with anti-strike device,blade seat stopped working when the bolts are cut off to avoid damaging machine.May reuse it after changing a new one.