In wood processing plants,debarker is a kind of production machinery that is widely used.Because it can perform good peeling on the board during production,it is favored by many manufacturers.The debarker manufacturer recommends that it needs to be used regularly.The maintenance and maintenance of the equipment will only shorten the service life of the mechanical equipment,so the maintenance work of debarker must master the maintenance methods.
　When using the product,it is necessary to carefully maintain the various parts of the product,and it is also necessary to apply smooth oil to the parts that it runs,so as to ensure that the product persists smoothly in the process of use.If the appearance of the veneer is uneven,watch it.Whether the blade is flat or bent or not,depends on whether the blade is relatively sharp.If it is not sharp,remove it and re-adjust the knife position with a stone grinder.Reasonable heat treatment of debarker blades can not only improve the hardness of the surface,but also increase the wear resistance of the blades.Debarker manufacturers can change the chemical composition of the blade surface to a certain extent through the infiltration technology,so that the wear resistance and corrosion resistance of the blade can be improved.
　If the parts of the product are relatively severely worn,they can be stopped and replaced,which can ensure the normal operation of the product and maximize the product.Good maintenance and correct use methods are the guarantee of his performance and safe use

　The wear resistance of debarker blades has a great impact on production efficiency.After debarker manufacturers process the blades through reasonable production technology,it can not only improve the production efficiency of debarker,but also reduce the replacement frequency of replacement blades.,Improve the wear resistance of the blade,mainly to improve the ability of the blade to resist abrasion,increase the service life,and accelerate the production efficiency.