Shandong Feixian Jinlun Machinery Factory -- veneer peeling machine

They have the geometric properties, identity, uniformity and surface formability that the original wood does not have. Such as Glulam, laminated veneer lumber, single slab laminated timber, long sliced laminated timber, reconstituted wood, oriented particleboard, etc.

With China’s reform and opening up and the development of social economy, it provides a broad market space and development prospects for the development of wood processing machinery manufacturing industry. But at the same time, a large number of foreign wood processing equipment will flood into the market, which will make China’s wood processing machinery manufacturing industry face more severe competition.

What are the main influencing factors of veneer peeling machine wear?

In the process of using the machine, wear is a common phenomenon. There are many factors that affect the wear of veneer peeling machine, and the main processing loss is these three points. The small series of rotary cutting and shearing machine is specially arranged for you

1. Because the logs are not round and uneven in thickness, the rotary cutting is not continuous, and a part of the broken veneer can not be used;

2. The end loss is caused by the clamping head of the veneer peeling machine clamping the two ends of the wood section, which makes the rotary cutter blunt, reduces the rotary cutting speed, and also affects the quality of the board;

3. Wood core loss, the waste produced by veneer rotary cutting is broken veneer and wood core, which leads to the waste of wood resources.

The veneer peeling machine is the main equipment for plywood production, which is divided into two types: the veneer peeling machine with card and the veneer peeling machine without card. With the progress of science and technology, digital servo control technology has also been applied to the production of veneer peeling machine. In recent years, CNC veneer peeling machine has appeared. The emergence of CNC veneer peeling machine not only improves the quality and precision of the production veneer, but also greatly improves the production efficiency and the degree of automation of the whole machine. CNC non card veneer peeling machine is an important equipment in plywood production line or veneer production line. It is mainly used to reuse the residual (or round) wood core of the veneer peeling machine with clamping shaft. The wood core with different length and within a certain diameter range is cut into veneers with different thickness, and the rotary cutting diameter is small.

Card cutting machine: easy to operate and high degree of automation

Product features: servo motor is used to drive the precise screw rod to feed; the plate thickness can be changed only by inputting the plate thickness number without changing the gear, and the rotary cutting accuracy is high; different wood species can also be rotated together without affecting the plate thickness; the board surface has good surface finish, and is insensitive to the reaction between the internal and external surfaces of wood; it can save electricity, operate simply and maintain conveniently.