JinLun machine factory produces veneer peeling and debarker.

Contact Telephone

400-839-8077

News

Home > Debarker News

Method for precise control of veneer thickness by veneer peeling machine

TAG:veneer peeling  veneer peeling machine  2020-10-1033People viewed
 Everyone is familiar with plywood.Now most of the furniture we use in our lives are made of it.Its aesthetics is no less than that of solid wood furniture.It also improves the utilization of wood and saves costs.It is very popular nowadays.Plywood is made by laminating multiple layers of veneer and pressed at high temperature,and the veneer is realized by peeling the wood section by the veneer peeler,so the veneer peeler indirectly affects the quality of the plywood.Because the thickness of plywood required by different customers is different,this requires plywood manufacturers to adjust the veneer peeling machine according to the actual situation when peeling the wood.
Method for precise control of veneer thickness by veneer peeling machine
 Many users do not know how to control the thickness of the veneer.In fact,the veneer peeler is set to a thickness of 1-2 mm before leaving the factory.If you want to change the thickness of the veneer later,you must adjust the pressure of the machine.If you can’t adjust yourself well,you can contact Jinlun Machinery and we will come to adjust it for you.How can you adjust it yourself?Let’s take a look at it together.
veneer peeling machine
 Under normal circumstances,the veneer peeling machine is set according to the thickness of 1 to 2 mm before leaving the factory.If you want to change the thickness of the veneer later,you must first adjust the pressure of the veneer peeler.Use a triangle ruler against the upper and inner side of the double roll of the veneer peeling,and use a 150 mm ruler to hold the top of the single roll to observe the value at the junction between the bottom of the triangle and the ruler.When the thickness of the leather is 1 to 2 mm Take 35 to 36 mm.If the leather thickness specification is less than 1 mm,the reading value will increase accordingly;if the leather thickness specification is greater than 2 mm,the reading value will decrease accordingly.If you want to increase the pressure of the veneer peeler,you need to add spacers between the single box and the knife shoulder on both sides;when the pressure is reduced,reduce the spacers.
veneer peeling machine
 The above is how the Jinlun brand veneer peeler precisely controls the thickness of the veneer.Do you understand?If you want to know more about the price of Jinlun brand veneer peeling,please feel free to call our customer service hotline.

Other News