even determines the quality of the plywood.
In manufacturing enterprises,accidents generally occur during the use of equipment.Most of the accidents that occur during the operation of the equipment are caused by failure to comply with safety regulations.As equipment operators,the rules must always be kept in mind:Do not wipe,lubricate or maintain the machine during the operation of the equipment.
The operator of the equipment must be trained in professional machinery and basic electrical operation,and be in good health;persons who drink alcohol,take drugs or similar situations are not allowed to operate,maintain and repair the equipment;before the equipment is used,the operator should check whether all safety facilities are working properly,And check the equipment for obvious defects;before starting the equipment,ensure that all parts are installed correctly,no parts are damaged,understand and clear the electrical operation keyboard and functions,and be familiar with use.All utensils that are not related to the equipment should be removed from the equipment;When cutting to the end,use small wooden shafts or other objects to knock off the remaining wooden shafts.It is strictly forbidden to touch the wooden shafts by hand;always check the travel switch of the feed station to ensure that it is running well to avoid collisions and damage to the equipment;Use it for other purposes.
These requirements are the basic principles that must be followed in the use of the CNC veneer peeling machine
.The operator should have a 100%sense of responsibility when working.The amount of responsibility at work reflects how responsible you are for your life.You must remember that no matter who is ultimately responsible for this accident Responsible,only the operator pays for the accident!