Foreword------------------------------------------------------------------------------------------------1

Safety operation regulations-----------------------------------------------------------------------1

1.Technical features---------------------------------------------------------------------------------3

1.1 Function and features------------------------------------------------------------------------3

1.2 Identification data------------------------------------------------------------------------------4

1.3 Technical specification------------------------------------------------------------------------4

2.Components and accessories------------------------------------------------------------------5

2.1 Main parts of the machine---------------------------------------------------------------------5

2.2 Concomitant accessories of the machine-------------------------------------------------6

2.3 Equipment available on request-------------------------------------------------------------6

3.Consignation,delivery and installation------------------------------------------------------7

3.1 Consignation-------------------------------------------------------------------------------------7

3.2 Delivery-------------------------------------------------------------------------------------------7

3.3 Lift machine--------------------------------------------------------------------------------------7

3.4 Install machine----------------------------------------------------------------------------------8

3.5 Power connection------------------------------------------------------------------------------8

3.6 Change rotary blade---------------------------------------------------------------------------8

4.Controls and regulations-----------------------------------------------------------------------9

4.1 Identification of roller rotary direction-----------------------------------------------------9

4.2 Safety devices---------------------------------------------------------------------------------10

5.Use machine------------------------------------------------------------------------------------10

5.1 Replace chain wheel and adjustment---------------------------------------------------10

5.2 Adjust blade gap------------------------------------------------------------------------------11

5.3 Fix log position----------------------------------------------------------------------------12

5.4 Pre-tight of the log-----------------------------------------------------------------------13

5.5 Peeling--------------------------------------------------------------------------------------13

5.6 Remove remaining wood shaft-------------------------------------------------------13

6.Maintenance and lubrication------------------------------------------------------------14

6.1 Periodic lubrication----------------------------------------------------------------------14

6.2 Adjust belt tension-----------------------------------------------------------------------14

6.3 Change rotary blade--------------------------------------------------------------------15

6.4 Recommended lubrication------------------------------------------------------------15

7.General malfunction and elimination-------------------------------------------------16

8.Comparison of veneer thickness and changed gear-------------------------------17

WWXQ130F non-clip veneer lathe comparison of veneer thickness and Changed gear----------------------------------------------------------------------------17

9.List for the possible worn accessories-----------------------------------------------21

10.Special instruction-----------------------------------------------------------------------22

11.Electric principal chart------------------------------------------------------------------23

12.List for electric components-------------------------------------------------------------24

Note:

The pictures in this manual are only for reference.Machine’s exterior and structures may slightly different from the pictures shown in this manual.We may not notify you the change of the manual contents when machine updated.