JinLun machine factory produces veneer peeling and debarker.

Contact Telephone

400-839-8077

News

Home > Debarker News

The debarker requires regular operation and regular maintenance

TAG:debarker  2021-3-1344People viewed
 Debarker is a good helper in the wood industry.It replaces the time-consuming and laborious problems of manpower.Once used,it has been favored by the majority of users.It has greatly changed the working environment and greatly improved work efficiency.
The debarker requires regular operation and regular maintenance
 Debarker operators:"Everyone is responsible for safe production">debarker operators:"Everyone is responsible for safe production".Safety knowledge has always been a concept deep in our minds.Only keeping in mind safety knowledge is the most important thing for us and others.Good responsibility,the operator must be assessed and certified before taking the job,and only after passing the post audit can take the job,responsible for the daily inspection and maintenance of the equipment,and strictly operate in accordance with the safety operating procedures.It is strictly forbidden to avoid illegal operations during the debarker work process.,The operator must strictly follow the standard operation,do not work fatigue and work after drinking,when we encounter a machine failure,we must not repair the machine while it is working,we must stop continuing the operation and turn off the equipment Immediately notify the person in charge,and contact the equipment management personnel for maintenance.Debarker needs us to take care of it so that our production can proceed smoothly.

 Equipment maintenance is also very important.Machines are like human beings.They need to rest after working hours to ensure the normal operation of work.We can only work better if we get enough rest.The same is true for debarker.The whole day’s work will definitely be tired,so the maintenance of debarker is an essential element.First of all,if the debarker is not used for a long time,the power supply must be cut off,all the lubricated parts are filled with oil,and the main shaft and cylinder are oiled to prevent rust.If the thermal relay action causes a stop due to overload,you need to press the"reset"button of the thermal relay to continue the operation.Debarker regularly inspects the wearing parts of the dispersing machine,such as bearings,oil seals,etc.,and replace them immediately if they are worn.The gears,bearings,balls,shafts and sleeves and cylinders of the debarker rotating parts are filled with oil once a week.If overheating or abnormal noise is found during use,it should be checked in time.The AC contactor is checked every six months,and the equipment is checked and repaired once a year.The oil used in the debarker fuel tank is replaced every six months and the fuel tank is cleaned,and the filter is cleaned once a month,and cleaned once within two or three days after the oil change.
debarker
 When using debarker,we must operate in accordance with the specifications.We believe that our regular operation and daily maintenance will bring us huge economic benefits.

Other News