JinLun machine factory produces veneer peeling and debarker.

Contact Telephone

400-839-8077

News

Home > Debarker News

The influence of component wear on CNC veneer peeling machine

TAG:veneer peeling machine  CNC veneer peeling machine  2020-11-1750People viewed
 Today,the editor of Feixian Jinlun will teach you what are the effects of the wear of the non-card CNC veneer peeling machine components?
The influence of component wear on CNC veneer peeling machine
 We know that the development of any thing is the relationship between the whole and the part of the enterprise.Different parts communicate and cooperate to form the whole society.So are people.There are many organs in the human body.Different organs have different functions and functions.,Indispensable.The same is true for the cardless CNC veneer peeling machine.It is composed of many components.The main components are the feed screw,the chuck shaft and the bushing,the main slide and the sliding block,the pressure ruler,the tool rest and the mating surface,etc.If one of the components is damaged,it will affect the function of the cardless CNC veneer peeler.The specific influencing factors caused by the wear of the parts of the non-card CNC veneer peeling machine are analyzed as follows:

 1)If the wear parts of the non-card CNC veneer peeling machine are more serious,the accuracy of the non-card CNC veneer peeling machine will be reduced,and the quality of the veneer will be affected,such as the appearance and flatness of the veneer.

 2)When the feed screw or nut wears,the tool holder will loosen,and the thickness of the veneer will be inconsistent.

 3)The abrasion of the clamping shaft and the shaft sleeve will cause the shaft to loosen,which will cause out-of-round rotation and also cause the thickness of the veneer to be inconsistent.

 4)The wear of the main slide will cause the cutting angle of the rotary cutting tool to change during rotary cutting,resulting in a thick outer ring,a thin inner ring,or a wave shape.

 5)The surface of the pressure ruler or the knife holder is severely worn,and horizontal sliding will occur.The wood will push the ruler back during rotary cutting,which increases the gap between the knife door and causes insufficient pressure on the veneer.The veneer is rough.
CNC veneer peeling machine
 From the above information,we can conclude that if any part of the cardless CNC veneer peeling machine has any problem,it must be repaired immediately to avoid damage.

Other News