The veneer peeling machine is very important to the wood industry,and it has greatly promoted the development and progress of the wood industry.But its wear and tear is also very serious,which requires us to maintain and maintain it correctly.Because the working environment of the veneer peeling machine is very harsh,it will inevitably cause a certain degree of damage to the equipment,and the service life will be greatly reduced.Then how to maintain the veneer peeling machine correctly?
　The maintenance work of the veneer peeling machine must be done well.When using the product,it is necessary to take care of the various parts of the product,and it is also necessary to apply smooth oil to the parts that it runs,so as to ensure that the product persists smoothly during use.If the appearance of the veneer is uneven,watch it.Whether the blade is flat or bent,or whether the blade is relatively sharp,if it is not sharp,remove it and re-adjust the knife position with stone sanding.If the parts of the product are relatively severely worn,they can be stopped and replaced,which can ensure the normal operation of the product and maximize the product.
　The veneer peeling machine was originally designed to save energy,but if it is not maintained,it will waste manpower and financial resources,so we must learn to maintain it correctly.The operation speed of the veneer peeling machine is extremely fast and the efficiency is extremely high.Therefore,it can be maintained during the operation.It can not only maintain our veneer peeling machine,but also allow us to save more expenses..