JinLun machine factory produces veneer peeling and debarker.

Contact Telephone

400-839-8077

News

Home > Debarker News

Tips for adding lubricant to CNC veneer peeling machine

TAG:veneer peeling machine  CNC veneer peeling machine  2020-11-26168People viewed

 Tips for adding lubricating oil to CNC veneer peeling machine

Tips for adding lubricant to CNC veneer peeling machine
 What I want to introduce to you today is the tips for adding lubricant to the veneer peeler.The veneer peeling machine can only ensure the normal operation of the equipment by adding lubricating oil from time to time.Therefore,lubricating oil must be added frequently when using CNC veneer peeling machine,but the method of adding lubricating oil must be paid attention to.
CNC veneer peeling machine
 The higher the rotation or sliding speed of the CNC veneer peeling machine,the lower the viscosity of the lubricating oil;when the friction surface is rough,the oil with higher viscosity should be used,otherwise,the lubricating oil with low viscosity should be used.For mechanisms prone to non-liquid friction,such as variable load,unequal speed,or frequent start and stop,lubricating oil with a larger viscosity should be used;the greater the pressure per unit area,the greater the viscosity of the lubricating oil.The working temperature is high,the viscosity of the oil used should increase;the above points are just a few tips for adding lubricating oil that we will introduce to you today.If you want to know more,please contact us.

Other News