JinLun machine factory produces veneer peeling and debarker.

Contact Telephone



Home > Debarker News

What are the tips for purchasing a veneer peeling machine

TAG:veneer peeling machine  2021-4-19412People viewed
 What aspects should be considered when purchasing a veneer peeling machine to meet our requirements in terms of quality,price and service.
What are the tips for purchasing a veneer peeling machine
 Most people are concerned about the efficiency of the veneer peeling machine.Although the production efficiency and the automation of the whole machine have been greatly improved,there are still many buyers who have to test it personally before they really understand what it is.speed.

 For customers who come to our factory to buy a veneer peeling machine,we must explain the following specific matters:

 1 The radial vibration of the chuck shaft is not more than 0.1 mm.The guide rail of the tool post is required to be a horizontal plane in the vertical and horizontal directions,and its deviation is not more than 0.03 mm per meter length.The two guide rails of the tool post should be parallel to each other,and the deviation should not exceed 0.04 mm per meter length of the guide rail.The misalignment of the center lines of the two main shafts does not exceed 0.2 mm.The centerline of the spindle should be parallel to the working surface of the guide rail,and its deviation should not be greater than 0.15 mm.

 2 High precision:According to the detection data of the tool bed displacement sensor,the feed speed of the tool bed can be calculated at a high speed in real time,and the thickness of the cut product is uniform.

 3 The cutting thickness can be set to meet the needs of different specifications.

 4 Fast response,high precision,fully meet the requirements of rapid feed in the later stage of rotary cutting.

 5 The motor has a strong cutting force during low-speed heavy cutting.

 6 Simple structure,low cost,high reliability,simple installation and debugging,and convenient operation by workers.
veneer peeling machine
 In fact,when we buy anything,the price will become a factor that affects our purchase decision.We can think about it.When we buy something,we also understand that you get what you pay for.If the price is too low than the average,then the cost of this item must be lower than other costs,and then its quality must be There are problems,so we can’t buy too cheap machinery,we must make the right investment according to the characteristics of the industry.

 Have you mastered the essentials of purchasing a veneer peeler?In Feixian Jinlun Machinery Factory,you will be able to choose a satisfactory veneer peeling machine,and will be able to bring more help to your economic development.

Other News