JinLun machine factory produces veneer peeling and debarker.

Contact Telephone

400-839-8077

News

Home > Debarker News

debarker is our friend

TAG:debarker  2021-8-1091People viewed
 In the past,the debarker required manual participation in many activities,and the degree of automation was low.When the equipment was working,specialized personnel were required to feed and feed the machine.Therefore,at least two people can ensure its normal operation.This not only wastes time,but also wastes manpower.The new debarker developed now pays more attention to automation and intelligence.It can not only perfectly realize the function of peeling and rounding,but also realize the function of automatic wood loading and unloading,and can be used for two rotary cutting machines at the same time,which greatly reduces the number of staff.Improved production efficiency,but also liberated the staff’s labor force,allowing them to devote more energy to other tasks.The higher the degree of automation,the lower the production cost of the enterprise,which is conducive to the price advantage of the enterprise in the fierce market competition.

 debarker is to load logs,twigs and other wood into the drum,close the feed baffle,start the machine,and run in a clockwise direction.The wood runs in the drum with the operation of the machine,so that the peeling knife can peel off the skin on the wood.After fifteen minutes,turn off the machine,open the discharge baffle,then turn on the machine and run it counterclockwise for two minutes.The peeled wood can be automatically sent out from the drum.The stripping rate can reach 95%.

 Debarker has its own advantages.The plywood market needs debarker to help us.Debarker is very good in terms of production speed and net skin rate,so more and more people are buying.Debarker’s equipment is faster and more convenient to use,with the highest degree of automation.There is also an automated security inspection system,which saves us time,manpower,material and financial resources for checking equipment,and saves a lot of cost for the development of our enterprise.Debarker needs to be further improved.The quality of the products,the continuous improvement of the technical level of production,the improvement of the degree of automation,the reduction of the pressure on the enterprise,the saving of more costs for the enterprise,the improvement of the quality of the products,and the firmness of the quality route,allowing customers to recognize our products,Enterprises bring more economic benefits.

 We regard debarker as our friend,let us all treat our friend well!It will do its best to repay us.

Other News